China OEM Wire Mesh Pricelist – JXY type waste heat regeneration dryer – Juxian
China OEM Wire Mesh Pricelist – JXY type waste heat regeneration dryer – Juxian Detail:
Working principle
Waste heat regenerative dryer is a new type adsorption dryer, neither belongs to the regenerative heat, also don’t belong to no heat regenerative, and belongs to the temperature swing adsorption, is the use of high temperature air compressor exhaust heat regeneration desiccant, adsorbent is completely regenerate, even in low pressure 0.35 Mpa working condition of use, as long as the compressor load rate of not less than 70%, The drying device can work reliably, so it can make full use of its own energy and has energy-saving effect.The electric heater of the micro-heat regenerative dryer is cancelled. At the same time, the waste heat regenerative compressed air dryer is a new type of energy-saving compressed air drying equipment because there is no gas consumption during heating and regeneration.
Technical indicators
| Working pressure | 1.3-1.0mpa |
| Inlet temperature | ≥100℃ |
| Finished gas atmospheric pressure dew point | ≤-40℃ (alumina) ≤-52℃(molecular sieve) |
| Control mode | microcomputer automatic control |
| Working cycle | 6-8h |
| Regenerated steam consumption | ≤2% |
Technical characteristics
1. using the world’s advanced microcomputer controller, can realize communication and linkage control, excellent performance.
2. choose high quality butterfly valve, switching quickly, accurate and reliable action.
3. the use of gas diffusion device, uniform air distribution in the tower, unique filling method, long service life of the adsorbent.
4. The regeneration process uses the waste heat of air compressor, and the regeneration energy consumption is low.
5. the overall layout is reasonable, compact structure, simple installation, convenient use and maintenance.
Waste heat regeneration air dryer technical parameters table
|
Model |
Traffic Nm3/min |
Inlet and outlet diameter mm |
Total weight kg |
Overall dimensions L * W * H mm |
Power supply/power
|
|
JXY-100/8 |
100 |
150 |
7400 |
3850 * 2260 * 3200 |
220V/50Hz 100 w or less |
|
JXY-150/8 |
150 |
200 |
10700 |
4400 * 2600 * 3500 |
|
|
JXY-200/8 |
200 |
200 |
13400 |
4900 * 2700 * 3800 |
|
|
JXY-250/8 |
250 |
200 |
17050 |
5400 * 3100 * 3820 |
|
|
JXY-300/8 |
300 |
250 |
19400 |
5900 * 3200 * 3900 |
|
|
JXY-350/8 |
350 |
250 |
22000 |
6200 * 3200 * 4360 |
|
|
JXY-400/8 |
400 |
250 |
25500 |
7100 * 2900 * 4300 |
|
|
JXY-600/8 |
600 |
350 |
36000 |
8400 * 3300 * 4760 |
Process flow chart
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of "regard the market, regard the custom, regard the science" and the theory of "quality the basic, belief the very first and management the advanced" for China OEM Wire Mesh Pricelist – JXY type waste heat regeneration dryer – Juxian , The product will supply to all over the world, such as: Amsterdam, Karachi, Qatar, Our company warmly invites domestic and overseas customers to come and negotiate business with us. Let us join hands to create a brilliant tomorrow! We are looking forward to cooperating with you sincerely to achieve a win-win situation. We promise to try our best to provide you with high quality and efficient services.
By lucia from Mozambique - 2018.04.25 16:46
This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
By Albert from Morocco - 2018.04.25 16:46
