China OEM Oil Filter Series Manufacturers – JXW no heat regenerative dryer – Juxian

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Every single member from our higher effectiveness product sales staff values customers' requires and organization communication for LPG Deodorization Equipment, Air Compressor Post-Processing Equipment, Portable Oxygen Concentrator, We warmly welcome all standpoint inquiries from home and abroad to cooperate with us, and anticipate your correspondence.
China OEM Oil Filter Series Manufacturers – JXW no heat regenerative dryer – Juxian Detail:

Product introduction

No heat adsorption compressed air dryer is a kind of equipment which adopts pressure swing adsorption principle and no heat regeneration method to dry compressed air.Adopt new pneumatic disc valve and PLC intelligent program controller and other advanced technology, with automatic timing, automatic switching, working state simulation display and less consumption of gas.

It is the most economical and energy-saving adsorption dryer in the purification industry, which is widely used in electronics, food, metallurgy, electric power, chemical industry, petroleum, medicine, light textile, tobacco, instruments, meters, automatic control and other industries.

Technical characteristics

1. the use of safe and reliable control components, to ensure that the output signal of the controller safely and accurately reach the instruction target.

2. the use of microcomputer control, digital display of two towers alternately running state.

3. to ensure the stable and reliable dew point of finished products, low energy consumption.

4. simple and generous structure, humanized design, easy to operate and maintain.

5. a variety of fault alarm function.

6. advanced variable program, stable and reliable operation.

Equipped with RS485/RS232 intermodal interface for remote communication, centralized monitoring and air compressor intermodal control.

Technical indicators

Working pressure  0.6-1.0mpa (1.0-1.3mpa upon request)
Inlet temperature  < 50℃
Dew point of finished product  ≤-40℃(alumina)≤-52℃ (molecular sieve)
Regeneration gas consumption  ≤10%
Pressure loss  ≤ 0.02mpa
Operation period  10 minutes

Technical parameters

Model

Rated capacity

(after Nm/h)

Nominal inlet diameter DN (mm)

Floor area size (mm)

JXW-1

1.2

25

780 times 320 times 1370

JXW-2

2.4

25

820 * 320 * 1470

JXW-3

3.6

32

920 * 350 * 1590

JXW-6

6.8

40

1040 times 420 times 1820

JXW-10

10.9

50

1200 * 500 * 2150

JXW-16

16.5

65

1420 times 550 times 2500

JXW-20

22

65

1560 * 650 * 2500

JXW-30

32

80

1750 times 700 times 2530

JXW-40

43.5

100

1840 * 900 * 2550

JXW-50

53

100

1920 * 900 * 2680

JXW-60

65

125

2100 * 1000 * 2870

JXW-80

85

150

2520 * 1200 * 2820

JXH-100

108

150

2600 * 1200 * 2950

JXW-150

160

200

3000 * 1400 * 3170

JXW-200

210

200

3700 * 2000 * 3300


Product detail pictures:

China OEM Oil Filter Series Manufacturers –  JXW no heat regenerative dryer –  Juxian detail pictures


Related Product Guide:

The key to our success is "Good Product Excellent, Reasonable Rate and Efficient Service" for China OEM Oil Filter Series Manufacturers – JXW no heat regenerative dryer – Juxian , The product will supply to all over the world, such as: Kuwait, Mali, Barbados, We hope to have long-term cooperation relationships with our clients. If you are interested in any of our products, make sure you do not hesitate to send enquiry to us/company name. We ensure that you can be totally satisfied with our best solutions!
  • The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
    5 Stars By Lena from Kenya - 2018.09.23 17:37
    This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
    5 Stars By Hellyngton Sato from Canada - 2017.12.09 14:01
    Write your message here and send it to us