China OEM Nitrogen Sensor Manufacturers – JXW no heat regenerative dryer – Juxian
China OEM Nitrogen Sensor Manufacturers – JXW no heat regenerative dryer – Juxian Detail:
Product introduction
No heat adsorption compressed air dryer is a kind of equipment which adopts pressure swing adsorption principle and no heat regeneration method to dry compressed air.Adopt new pneumatic disc valve and PLC intelligent program controller and other advanced technology, with automatic timing, automatic switching, working state simulation display and less consumption of gas.
It is the most economical and energy-saving adsorption dryer in the purification industry, which is widely used in electronics, food, metallurgy, electric power, chemical industry, petroleum, medicine, light textile, tobacco, instruments, meters, automatic control and other industries.
Technical characteristics
1. the use of safe and reliable control components, to ensure that the output signal of the controller safely and accurately reach the instruction target.
2. the use of microcomputer control, digital display of two towers alternately running state.
3. to ensure the stable and reliable dew point of finished products, low energy consumption.
4. simple and generous structure, humanized design, easy to operate and maintain.
5. a variety of fault alarm function.
6. advanced variable program, stable and reliable operation.
Equipped with RS485/RS232 intermodal interface for remote communication, centralized monitoring and air compressor intermodal control.
Technical indicators
| Working pressure | 0.6-1.0mpa (1.0-1.3mpa upon request) |
| Inlet temperature | < 50℃ |
| Dew point of finished product | ≤-40℃(alumina)≤-52℃ (molecular sieve) |
| Regeneration gas consumption | ≤10% |
| Pressure loss | ≤ 0.02mpa |
| Operation period | 10 minutes |
Technical parameters
|
Model |
Rated capacity (after Nm/h) |
Nominal inlet diameter DN (mm) |
Floor area size (mm) |
|
JXW-1 |
1.2 |
25 |
780 times 320 times 1370 |
|
JXW-2 |
2.4 |
25 |
820 * 320 * 1470 |
|
JXW-3 |
3.6 |
32 |
920 * 350 * 1590 |
|
JXW-6 |
6.8 |
40 |
1040 times 420 times 1820 |
|
JXW-10 |
10.9 |
50 |
1200 * 500 * 2150 |
|
JXW-16 |
16.5 |
65 |
1420 times 550 times 2500 |
|
JXW-20 |
22 |
65 |
1560 * 650 * 2500 |
|
JXW-30 |
32 |
80 |
1750 times 700 times 2530 |
|
JXW-40 |
43.5 |
100 |
1840 * 900 * 2550 |
|
JXW-50 |
53 |
100 |
1920 * 900 * 2680 |
|
JXW-60 |
65 |
125 |
2100 * 1000 * 2870 |
|
JXW-80 |
85 |
150 |
2520 * 1200 * 2820 |
|
JXH-100 |
108 |
150 |
2600 * 1200 * 2950 |
|
JXW-150 |
160 |
200 |
3000 * 1400 * 3170 |
|
JXW-200 |
210 |
200 |
3700 * 2000 * 3300 |
Product detail pictures:
Related Product Guide:
We believe that prolonged time period partnership is really a result of top of the range, benefit added provider, prosperous knowledge and personal contact for China OEM Nitrogen Sensor Manufacturers – JXW no heat regenerative dryer – Juxian , The product will supply to all over the world, such as: Belgium, Argentina, Sao Paulo, We confirm to public, cooperation, win-win situation as our principle, adhere to the philosophy of make a living by quality, keep developing by honesty , sincerely hope to build up a good relationship with more and more customers and friends, to achieve a win-win situation and common prosperity.
By Mary from Algeria - 2017.05.21 12:31
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Maggie from Chicago - 2017.09.22 11:32
