China OEM Medical Products Manufacturer – JXW no heat regenerative dryer – Juxian
China OEM Medical Products Manufacturer – JXW no heat regenerative dryer – Juxian Detail:
Product introduction
No heat adsorption compressed air dryer is a kind of equipment which adopts pressure swing adsorption principle and no heat regeneration method to dry compressed air.Adopt new pneumatic disc valve and PLC intelligent program controller and other advanced technology, with automatic timing, automatic switching, working state simulation display and less consumption of gas.
It is the most economical and energy-saving adsorption dryer in the purification industry, which is widely used in electronics, food, metallurgy, electric power, chemical industry, petroleum, medicine, light textile, tobacco, instruments, meters, automatic control and other industries.
Technical characteristics
1. the use of safe and reliable control components, to ensure that the output signal of the controller safely and accurately reach the instruction target.
2. the use of microcomputer control, digital display of two towers alternately running state.
3. to ensure the stable and reliable dew point of finished products, low energy consumption.
4. simple and generous structure, humanized design, easy to operate and maintain.
5. a variety of fault alarm function.
6. advanced variable program, stable and reliable operation.
Equipped with RS485/RS232 intermodal interface for remote communication, centralized monitoring and air compressor intermodal control.
Technical indicators
| Working pressure | 0.6-1.0mpa (1.0-1.3mpa upon request) |
| Inlet temperature | < 50℃ |
| Dew point of finished product | ≤-40℃(alumina)≤-52℃ (molecular sieve) |
| Regeneration gas consumption | ≤10% |
| Pressure loss | ≤ 0.02mpa |
| Operation period | 10 minutes |
Technical parameters
|
Model |
Rated capacity (after Nm/h) |
Nominal inlet diameter DN (mm) |
Floor area size (mm) |
|
JXW-1 |
1.2 |
25 |
780 times 320 times 1370 |
|
JXW-2 |
2.4 |
25 |
820 * 320 * 1470 |
|
JXW-3 |
3.6 |
32 |
920 * 350 * 1590 |
|
JXW-6 |
6.8 |
40 |
1040 times 420 times 1820 |
|
JXW-10 |
10.9 |
50 |
1200 * 500 * 2150 |
|
JXW-16 |
16.5 |
65 |
1420 times 550 times 2500 |
|
JXW-20 |
22 |
65 |
1560 * 650 * 2500 |
|
JXW-30 |
32 |
80 |
1750 times 700 times 2530 |
|
JXW-40 |
43.5 |
100 |
1840 * 900 * 2550 |
|
JXW-50 |
53 |
100 |
1920 * 900 * 2680 |
|
JXW-60 |
65 |
125 |
2100 * 1000 * 2870 |
|
JXW-80 |
85 |
150 |
2520 * 1200 * 2820 |
|
JXH-100 |
108 |
150 |
2600 * 1200 * 2950 |
|
JXW-150 |
160 |
200 |
3000 * 1400 * 3170 |
|
JXW-200 |
210 |
200 |
3700 * 2000 * 3300 |
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of China OEM Medical Products Manufacturer – JXW no heat regenerative dryer – Juxian , The product will supply to all over the world, such as: Maldives, Sao Paulo, Vietnam, Abiding by our motto of "Hold well the quality and services, Customers Satisfaction", So we give our clients with high quality products and solutions and excellent service. Be sure to feel free to contact us for further information.
By trameka milhouse from Berlin - 2017.08.21 14:13
We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.
By Anne from Orlando - 2017.06.16 18:23
