China OEM Dissolved Air Flotation Device Supplier – JXY type waste heat regeneration dryer – Juxian
China OEM Dissolved Air Flotation Device Supplier – JXY type waste heat regeneration dryer – Juxian Detail:
Working principle
Waste heat regenerative dryer is a new type adsorption dryer, neither belongs to the regenerative heat, also don’t belong to no heat regenerative, and belongs to the temperature swing adsorption, is the use of high temperature air compressor exhaust heat regeneration desiccant, adsorbent is completely regenerate, even in low pressure 0.35 Mpa working condition of use, as long as the compressor load rate of not less than 70%, The drying device can work reliably, so it can make full use of its own energy and has energy-saving effect.The electric heater of the micro-heat regenerative dryer is cancelled. At the same time, the waste heat regenerative compressed air dryer is a new type of energy-saving compressed air drying equipment because there is no gas consumption during heating and regeneration.
Technical indicators
Working pressure | 1.3-1.0mpa |
Inlet temperature | ≥100℃ |
Finished gas atmospheric pressure dew point | ≤-40℃ (alumina) ≤-52℃(molecular sieve) |
Control mode | microcomputer automatic control |
Working cycle | 6-8h |
Regenerated steam consumption | ≤2% |
Technical characteristics
1. using the world’s advanced microcomputer controller, can realize communication and linkage control, excellent performance.
2. choose high quality butterfly valve, switching quickly, accurate and reliable action.
3. the use of gas diffusion device, uniform air distribution in the tower, unique filling method, long service life of the adsorbent.
4. The regeneration process uses the waste heat of air compressor, and the regeneration energy consumption is low.
5. the overall layout is reasonable, compact structure, simple installation, convenient use and maintenance.
Waste heat regeneration air dryer technical parameters table
Model |
Traffic Nm3/min |
Inlet and outlet diameter mm |
Total weight kg |
Overall dimensions L * W * H mm |
Power supply/power
|
JXY-100/8 |
100 |
150 |
7400 |
3850 * 2260 * 3200 |
220V/50Hz 100 w or less |
JXY-150/8 |
150 |
200 |
10700 |
4400 * 2600 * 3500 |
|
JXY-200/8 |
200 |
200 |
13400 |
4900 * 2700 * 3800 |
|
JXY-250/8 |
250 |
200 |
17050 |
5400 * 3100 * 3820 |
|
JXY-300/8 |
300 |
250 |
19400 |
5900 * 3200 * 3900 |
|
JXY-350/8 |
350 |
250 |
22000 |
6200 * 3200 * 4360 |
|
JXY-400/8 |
400 |
250 |
25500 |
7100 * 2900 * 4300 |
|
JXY-600/8 |
600 |
350 |
36000 |
8400 * 3300 * 4760 |
Process flow chart
Product detail pictures:
Related Product Guide:
To be a result of ours specialty and service consciousness, our enterprise has won an excellent status between buyers all around the globe for China OEM Dissolved Air Flotation Device Supplier – JXY type waste heat regeneration dryer – Juxian , The product will supply to all over the world, such as: Manchester, Costa rica, Uruguay, We have been making our products for more than 20 years . Mainly do wholesale , so we have the most competitive price , but highest quality. For the past years , we got very good feedbacks , not only because we provide good products , but also because of our good after-sale service . We are here waiting for you for your inquiry.

As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
